Was about to get on a thruway for an hour long drive and the shifter went limp. Luckily I had enough momentum to coast into a dunkin donuts parking lot. I immediately thought the worst (clutch), but after popping the hood it was obvious what happened. Had to have her towed home.
The cable snapped right at the weld on the bushing ring. Is this the "normal" place for these to break?
Good thing I took some time off from work for the holidays. I'll need to spend some of it out in the cold fixing this. :/
The cable snapped right at the weld on the bushing ring. Is this the "normal" place for these to break?
Good thing I took some time off from work for the holidays. I'll need to spend some of it out in the cold fixing this. :/