I have a very good understanding of electronics and can turn a screw driver fast as a power drill just with a little less torque.Solder phone parts or computers and have been electrocuted many times.Not trying to brag but we all have to learn.
2005 tib se v6 6speed
Correct if wrong thank you
Here is where I'm at I have pulled off both doors and after testing the voltage on the passenger side door and I got no voltage driver side puts out 12v so my window was stuck down.I took some wire and used the 12v from the driver side to power the window and it went up as soon as I pressed the button.so the motor is good 100% now i 'm trying to work threw the electrical.
The fuse is for both windows as far as I can see and it is fine.I hit the switch on both sides there was no sound other than the keyboard like click from the key it self.I think it is the relay but the only relay I can find is for both windows from what I have seen.I haven't tried to clean the contacts on the switch but this is the first door issue I have had on that side.
Before the failure the door handle got jacked up and a buddy was left with a handle.super funny because it is not very expensive part.It has happened to me once before that is why I laugh.Has the forum come up with a word for that yet because I bet it happens a lot.Any help will be appreciated and thanks for your time.
2005 tib se v6 6speed
Correct if wrong thank you
Here is where I'm at I have pulled off both doors and after testing the voltage on the passenger side door and I got no voltage driver side puts out 12v so my window was stuck down.I took some wire and used the 12v from the driver side to power the window and it went up as soon as I pressed the button.so the motor is good 100% now i 'm trying to work threw the electrical.
The fuse is for both windows as far as I can see and it is fine.I hit the switch on both sides there was no sound other than the keyboard like click from the key it self.I think it is the relay but the only relay I can find is for both windows from what I have seen.I haven't tried to clean the contacts on the switch but this is the first door issue I have had on that side.
Before the failure the door handle got jacked up and a buddy was left with a handle.super funny because it is not very expensive part.It has happened to me once before that is why I laugh.Has the forum come up with a word for that yet because I bet it happens a lot.Any help will be appreciated and thanks for your time.