So i just finished installing an oem clutch in my 03 2.0 tib. Everything is back together, and as im putting the clutch fork arm on for the slave cylinder, i do the normal procedure of prying the arm towards the slave cylinder to make the TOB snap into the pressure plate. Well, i hear it click in, but to check and make sure its in tight, i pushed it back away from the slave, and it pops right back out of the pressure plate... or so it seems. Im not sure what could be happening here, but to my knowledge, it sounds like the TOB isnt snapping into the Pressure plate well enough, and not staying snapped in. Or maybe its something else... please help! thanks.
↧